A Hudson Reed traditional twin exposed valve with separate controls for temperature and flow. Operates one shower accessory: rigid riser kit. Suitable for all types of plumbing installation this shower valve has the added safety benefit of a built in anti scald device should the cold water supply fail.
Depth - 136mm
Distance between hot & cold centres - 150mm
Water Pressure - LP1 - 0.1 bar pressure minimum
Accurate flow control.
Thermostatic control to +/- 2 to 3 &°C even if the water pressure fluctuates.
Full thermal protection to prevent scalding in the event of hot or cold water shut off.
In the event of hot or cold water failure, the valve will shut down as per the relevant standard.
The patented cartridge is highly resistant to calcium build up - even in hard water areas.
Our valves are suitable for use with all systems: gravity fed, pumped, unvented high pressure or fully modulated combi-boilers.
Excellent flow rates - even at low pressure.
The cartridge is fully reversible, meaning if hot and cold supplies are the wrong way round, it doesn't need re-plumbing.
Simply remove the cartridge, turn 180°C and replace.
Standards - EN200 and/or WRc/NSF
Suitable for all plum bing systems
20 Year Warranty
0.1 Bar - 2.5 l/m
0.5 Bar - 13 l/m
1.0 Bar - 18.5 l/m
2.0 Bar - 26.5 l/m
3.0 Bar - 33 l/m